apem www.apem.com a-7 tl series t iny washable toggle switches distinctive features and specifications a materials ?case : pbt ?actuator : brass, nickel plated ?contacts and terminals : 0 : brass, gold plated 1 : brass, silver plated 3 : brass, gold plated (1,27 micron gold) 8 : contact brass, gold plated + tin plated terminals 9 : contact brass, gold plated (1,27 micron gold) + tin plated terminals ?terminal seal : epoxy general specifications ?strength of terminals : pull-out force - 10n max. ?operating temperature : -30? to +85? ?moisture : 21 days 95 % (nfc 20-603 - iec 68-2-3) ?cleaning : solvents or water + detergent ?wave soldering : 260? - 5 sec. electrical specifications ?max. current/voltage rating with resistive load : - gold plated contacts : 0,4va 20v max. ac or dc - silver plated contacts : 0,5a 48v max. ac or dc ?minimum load : 10ma 50mv - 10? 5vdc ?contact resistance : 20 m ? max. ?insulation resistance : 1.000 m ? min. at 500vdc ?dielectric strength : 1.000 vrms 50 hz min. between terminals and frame 500 vrms 50 hz min. between terminals ?electrical life at full load : contacts gold plated silver plated 60.000 30.000 20.000 10.000 number of cycles 2 positions 3 positions ? sealed ?single piece case ?o-ring seal between actuator and bushing ?epoxy sealed terminals ? wide variety of contact materials ? same pcb layout as tp, tr and tg tiny switches
a-8 apem www.apem.com tl series t iny washable toggle switches overview a tl series number of poles 3 single pole 4 double pole electrical functions 6 on - on 9 on off on 7 mom off mom 8 on off mom 2 on - mom te r minals p0 straight pc y0 bracket mounting w0 right angle, horizontal mounting ww right angle, vertical mounting mw wire-wrap about this series on the following pages, you will find successively : - model structure of switches - options in the same order as in above chart dimensions : first dimensions are in mm while inches are shown as bracketted numbers. notice : please note that not all combinations of above numbers are available. refer to the following pages for further information. contact and terminal materials 0 brass, gold plated 1 brass, silver plated 3 brass, gold plated (1,27 micron gold) 8 contact brass, gold plated + tin plated terminals 9 contact brass, gold plated (1,27 micron gold) + tin plated terminals lever and case styles lever styles : ?short - standard ?medium ?long ?cylindrical codes according to lever finish and case colours : see "options" pages. insulated levers available. special options 00 no special requirement 07 t rimmed terminals - length 3,2 (.125) 08 extended terminals 18 switch without ground plate 20 ground plate with 2 pins 25 t rimmed terminals - length 5 (.196) 30 wire-wrap on bracket mounting models 50 crimped ground plate pins packaging unit : 100 pieces, except for models with ww terminals (50 pieces)
apem www.apem.com a-9 tl series t iny washable toggle switches a right angle terminals - horizontal mounting : tl..w0 straight pc terminals - bracket mounting : tl..y0 straight pc terminals : tl..p0 model structure iii ii i single pole double pole tl36p0 tl46p0 on - on tl39p0 tl49p0 on off on tl37p0 tl47p0 mom off mom tl38p0 tl48p0 on off mom tl32p0 tl42p0 on - mom ?straight pc, right angle or wire-wrap terminals ? and 2 pole configurations iii ii i single pole double pole tl36y0 tl46y0 on - on tl39y0 tl49y0 on off on tl37y0 tl47y0 mom off mom tl38y0 tl48y0 on off mom tl32y0 tl42y0 on - mom iii ii i single pole double pole tl36w0 tl46w0 on - on tl39w0 tl49w0 on off on tl37w0 tl47w0 mom off mom tl38w0 tl48w0 on off mom tl32w0 tl42w0 on - mom shown with standard lever 1 2 3 (.027) (.129) 3.30 0.70 (.598) (.027) 15.20 0.70 1.10 (.043 dia) 5.08 1.00 3.30 4.20 2.50 0.70 5.00 4.60 5.00 0.50 9.10 3.80 2.54 2.54 (.196) (.027) (.129) (.098 dia) 24? (.196 dia) (.181 dia) (.019) (.358) (.039) (.165) (.149) (.200) (.100) (.100) (.318) 8.10 (.318) 8.10 (.043 dia) 1.10 6.10 5.30 (.208) (.240) (.200) 5.08 (.100) 2.54 i ii iii 3 2 1 14 456 (.400) (.100) (.100) (.200) (.149) (.165) (.039) (.027) (.358) (.015) (.019) (.400) (.224) (.208) (.181 dia) (.196 dia) 24? (.098 dia) (.129) (.338) (.196) (.400) 2.54 10.16 2.54 10.16 3.80 0.70 9.10 10.16 0.50 5.00 4.60 0.40 5.00 2.50 4.20 3.30 8.60 5.30 5.70 1.00 5.08 (.043 dia) 1.10 (.043 dia) 1.10 2.54 (.100) (.200) 5.08 i ii iii 3 2 1 456 14 (.149) (.165) (.200) 24 (.181 dia) (.196 dia) (.129) (.318) (.019) (.377) (.362) (.137) (.208) (.0.98 dia) (.218) (.027) (.129) (.200) (.200) (.100) (.100) (.043 dia) (.100) (.200) (.043 dia) 5.55 3.30 ?.50 0.50 8.10 ?.00 ?.60 4.20 3.80 9.60 3.30 ?.10 2.54 5.08 2.54 ?.10 0.70 3.50 5.30 9.20 5.08 5.08 5.08 2.54 (.100) 2.54 iii iii 321 654 3 6
a-10 apem www.apem.com tl series t iny washable toggle switches a wire-wrap terminals : tl..mw right angle terminals - vertical mounting : tl..ww iii ii i single pole double pole tl36ww tl46ww on - on tl39ww tl49ww on off on tl37ww tl47ww mom off mom tl38ww* tl48ww* on off mom tl32ww* tl42ww* on - mom iii ii i single pole double pole tl36mw tl46mw on - on tl39mw tl49mw on off on tl37mw tl47mw mom off mom tl38mw tl48mw on off mom tl32mw tl42mw on - mom * functions 2 and 8 : reversed connection available. consult factory. pcb mounting (.559) (.562) (.120) (.218) (.181) (.340) 8.65 4.60 5.55 3.05 14.30 14.20 (.196) 5.00 (.377) 9.60 (.100) (.100) (.200) (.149) (.165) (.039) (.358) (.019) (.181 dia) (.196 dia) 24? (.098 dia) (.598) (.027) (.196) 2.54 2.54 3.80 9.10 0.50 5.00 4.60 5.00 0.70 2.50 4.20 15.20 1.00 5.08 (.043 dia) 1.10 (.318) 8.10 (.318) 8.10 (.200) 5.08 1.10 (.043 dia) 6.10 5.30 (.208) (.240) 2.54 (.100) i ii iii 123 456 14 (.129) (.340) (.200) (.200) (.196) (.200) (.098 dia) (.149) (.362) (.208) (.196 dia) (.181 dia) (.165) (.027) (.200) (.019) (.358) (.200) (.100) (.200) (.100) (.043 dia) (.043 dia) (.137) 24? 2.5 4.20 4.60 5.00 0.70 5.00 8.65 3.30 5.08 5.08 9.10 5.08 1.10 1.10 5.08 2.54 2.54 3.80 5.08 0.50 3.50 5.30 9.20 5.08 (.200) 5.08 iii iii 1 2 3 63 6 5 4
apem www.apem.com a-11 tl series t iny washable toggle switches a contact and terminal materials 0 brass, gold plated 1 brass, silver plated 3 brass, gold plated (1,27 micron gold) 8 contact brass, gold plated + tin plated terminals 9 contact brass, gold plated (1,27 micron gold) + tin plated terminals lever and case styles short - standard long cylindrical medium case lever blue black nickel plated matt black 00 50 01 51 case lever blue black nickel plated - 56 case lever blue black nickel plated matt black 04 54 05 55 case lever blue black nickel plated matt black 02 52 03 53 (.208) (.240) (.196 dia) (.181 dia) (.165) (0149) (.098 dia) 24? 4.60 5.00 4.20 3.80 2.50 5.30 6.10 (.149) (.165) (.181 dia) (.196 dia) (.240) 4.60 5.00 4.20 3.80 6.10 (.255) 24? 6.50 (.062 dia) 1.60 (.098 dia) (.149) (.165) (.181 dia) (.196 dia) (.240) (.370) 24? 4.60 5.00 4.20 3.80 2.50 9.40 6.10 6.10 2.50 3.80 4.20 5.00 4.60 (.240) (.196 dia) (.181 dia) (.165) (.149) (.098 dia) (.291) 24? 7.40
a-12 apem www.apem.com tl series t iny washable toggle switches a special options 07 trimmed terminals - length 3,2 mm (.125) for tl..ww models only 00 no special requirement 40 with blue case 94 with black case 30 with blue case 90 with black case 08 extended terminals for tl..w0 models only 18 switch without ground plate for tl..ww models only 07 08 18 insulated levers - protected against electrostatic discharges (esd) up to 10kv. black colour. 20 ground plate with 2 pins for tl..ww models only 20 lever and case styles (continued) (.098 dia) (.149) (.165) (.181 dia) (.196 dia) (.240) 4.60 5.00 4.20 3.80 2.50 6.10 (.216) 5.50 24? 6.10 2.50 3.80 4.20 5.00 4.60 24? (.240) (.196 dia) (.181 dia) (.165) (.149) (.098 dia) (.299) 7.60 (.125) 3.20 (.492) 12.50 2.70 (.106) 10.16 (.400) (.200) (.400) (.100) (.043 dia) 5.08 1.10 10.16 2.54 50 crimped ground plate pins . retains switch on pcb during handling and wave soldering. for models tl..w0, tl..ww and tl..y0 single and double pole. 50 30 wire-wrap terminals on models with mounting bracket 30 25 trimmed terminals - length 5 mm (.196) for all models, except tl..ww 25 (.196) 5.00 (.598) 15.20
|
